...

Once you click save on this screen, assuming you picked a CUTE airport from the drop down, your ATB and BTP printers will be mapped.  Often you will hear some beeping noises from the printers as logos and PECTABs are loaded into the printers.

Confirm

...

Devices are Mapped

There are two primary areas you can look to confirm the printers devices are mapped:

Image AddedImage Added

The little window that opened when you logged into the CUTE application shows the status of connected peripherals.  If you open that window again (you may need to use ALT+TAB to open the window if it is now hidden) you should see that the ATB and BTP printers devices are showing "Online" (don't worry if the other devices still show "Unknown").

Also, ameliaRES will show your devices in the lower status bar.  You should see "BTP1: ONLINE ATB1: ONLINE" along with any scanners you have mapped.  Double clicking on this area of the status bar also opens up an additional window in ameliaRES:

Image RemovedImage Added

This window shows a bit more detail on the connected devices.  It also has a "Reset Terminal" button that can be used to force the printers devices to reconnect.  This can be useful in some troubleshooting situations.

If your printers devices are not showing online or you do not see the "Devices" section in the lower status bar in amelia then the ATB and BTP printer printers and scanners at the CUTE workstation will not work.  Please look at the CUTE Troubleshooting Guide for further help.

...

If you are logging into a CUTE workstation at an airport you are most likely using it to checkin passengers, print boarding passes and baggage tags.  That being said, once you are logged into ameliaRES you can really do any action you have permission to perform.

Checkin Passengers

Scanning Passenger Documents

If the passenger has a barcoded document such as a Boarding Pass or an ameliaRES Itinerary with a barcode then the barcode scanner can be used to quickly loat the passenger.  The flight must be pre-selected for this to work.k

Printing ATB/BTP Documents

The ameliaRES checkin module is used to checkin passengers.  This module will print boarding passes and baggage tags.  However you must select the appropriate printer before you can print either of these documents.  There are two methods of selecting the printer: 

1. The first time you print a boarding pass or baggage tag from an ameliaRES session you will automatically be prompted to select the printer you want to use.  Just click on the drop-down to see the list of printers available for the action you are trying to perform - boarding pass printer (ATB) or baggage tag printer (BTP).  Once you click "Save" the document will print.  The selection will be saved for this session and you will not need to select the printer again.
   1. The only disadvantage to this method is that the document will not automatically print the first time.  If you have the "auto print" feature turned on then the boarding pass will automatically print when you checkin the passenger. Obviously this won't work if you need to select the printer the first time.  Subsequent checkins will automatically print.
2. You can pre-select your printers in the checkin module by pressing and holding CTRL+SHIFT+F5 (or pressing the "Set Printers" button that appears when you press CTRL+SHIFT).  This will let you pre-set both the ATB and BTP printers.  Auto-printing will now work right from the first passenger action.
   
   

...