Page Comparison

...

When checking in a pax like this, the process will flow as below:

1. After clicking the J-Check In button, this message is shown:
   Image Modified
   
2. To provide this, double-click directly on the APIS fields of the pax record in question (OR double-click the Res# to open the reservation, OR double-click the name (Passenger column) to see the Passenger List), and access the APIS Passenger Information.
   Image Modified
   
3. Once all the required data is provided and saved, you will see it when you return to Check In.
4. Proceed to check-in the pax, and the data is validated (by the TSA).
   Image Modified
   
5. If successful, the APIS Results column will show ‘CLEARED’. (It can be helpful to force a refresh of the Check In screen using the F5-Refresh button before checking this.)
   1. If any pax are ‘NOT CLEARED’, un-check the pax (using the K-Not Checked In button) if necessary, then access their APIS info (using any of the methods described in step 2 above.).
      
   2. On the APIS Passenger Information form, click Edit, confirm the data and select the Information Verified checkbox, then click Save and Close.
      Image Added
      
   3. Check-in (J-Check In) the pax in question again.
      
6. Repeat the steps above to check-in/clear any other passengers.

2. Pax returning to Canada from US

When a pax is flying from the US to Canada, the process will flow like this:

1. After clicking the J-Check In button, this message is shown:
   Image Modified
   
2. To provide this, double-click directly on the APIS fields of the pax record in question (OR double-click the Res# to open the reservation, OR double-click the name (Passenger column) to see the Passenger List), and access the APIS Passenger Information.
3. Once all the required data is provided and saved, you will see it when you return to Check In.
4. Proceed to check-in the pax, and the data is validated (by the CBSA).

5. If successful, you will see this form:

   Image Modified
   

6. The Passenger Protect Check allows you to adjust pax details if required, and update the associated passenger record (using the Update Passenger Details checkbox).
   NOTE: If attempting to check-in 24+ hours ahead of the flight’s departure (exception - not normal operations), this will fail and display this message:

   Image Modified
   

7. Once check-in is complete, the APIS Results column will show ‘CLEARED’. (It can be helpful to force a refresh of the Check In screen using the F5-Refresh button before checking this.)
8. Repeat the steps above to check-in/clear any other passengers.